Quiet Electronics Moderated Newsgroup For The Electronic Professionals and Other Professionals > Colorado
> Used
> Pcb toner transfer set - diy printed circuit board etch
Pcb toner transfer set - diy printed circuit board etch
PCB Toner Transfer Set DIY PCB
Toner transfer paper (90+ Sheets), same as recomended by Thomas P. Gootee
After ironing board I put through the roller I built (included), works great. Nice even pressure.
Roller needs a power supply from old laptop etc, about 18VDC is good.
I can etch a board in 30 seconds with this pan
Hot water goes in the pan, etchant goes in tupperware.
Heat until etchant is about 100 degrees, then etch board.
What you see is what you get "WYSWYG"
Otherwise items will not be combined
All items untested unless otherwise stated.
