Quiet Electronics Moderated Newsgroup For The Electronic Professionals and Other Professionals > Minnesota
> Used
> Whitney jensen 10' x 12 ga. combination brake
Whitney jensen 10' x 12 ga. combination brake
WHITNEY JENSEN COMBINATION BRAKE, No. 1012
BOTH AN APRON BRAKE .. AND A BOX&PAN BRAKE.
MADE IN THE U.S.A. - STILL MANUFACTURED TODAY $24,000.00 NEW!
Here are the specs from Whitney........
Capacity*, Mild Steel: 12 Gauge
Maximum Bend Angle*** (past horizontal): 45-degrees
*Brake Capacity is reduced 2 gauges when box fingers are used.
**May be increased to 4" to accept box fingers.
***Only 20-degrees when box fingers are used.
The combination bending brakes are the most versatile brakes available from
Roper Whitney. In addition to straight bending, box and pan work, inside
bending, radius bending and other intricate forming operations are possible
with the use of special fingers.
* Up to 12 Gauge Maximum Capacity
* When both the apron angle iron work support and the apron filler plate are
removed, minimum 1/4" reverse bends may be made on all models except the 812
CONTACT US FOR MORE INFO OR PHOTOS.
