Quiet Electronics Moderated Newsgroup For The Electronic Professionals and Other Professionals > Connecticut
> New
> Wavetek cli-1450 combo signal level/leakage meter
Wavetek cli-1450 combo signal level/leakage meter
I am selling it because my company has upgraded to a new meter.
It is used and in good condition, only some minor scratches/wear.
I has served me well and it works perfectly, although it may need a new battery.
Here are the tech specs: Wavetek CLI-1450 Combination Signal Level/Leakage Meters Frequency Range 45 to559 MHz 45 to 890 MHz option 5 to 45 MHz sub-band option Accuracy 10 ppm @ 25°C (77°F) 20 ppm over temp Tuning Resolution 25 kHz Level Measurement Range -20 to +50 dBmV Resolution 0.1 dB Accuracy ±0.75 dB Flatness, ±0.75 dB Linearity @ 25°C (77°F) Digital Average Power (optional) ± 2.0 dB (typical) Scan Mode Number of Channels 120 Scan Rate Approximately 6 carriers/second Leakage Mode Level Measurement Input Sensitivity (with HD-1 dipole or VMA-3 mag mount) Video Detection From 1 µV with LT1000 Leakage Tagger activated (121 to 133.2625 MHz). CW Detection From 0.5 µV typical with LT1000 Leakage Tagger activated (121 to 133.2625 MHz). Measurement From 1.4 µV (115 to 140 MHz). Range 0.5 to 2,000 µV (at input connector) Accuracy Measurement ±1.5 dB @ 25°C (77°F) Find & Fix ±2.25 dB @ 25°C (77°F) Tuning Carrier Frequency Range 115 to 140 MHz range (Video) Accuracy 10 ppm @ 25°C (77°F); 20 ppm over temp. Resolution 25 kHz Tagger modulation for leakage Modulation frequency 5 to 25 Hz Operating Temp. Range -10 to +50°C (14 to 122°F); ±3 dB drift, -10 to +50°C Water Resistance Meets or exceeds MIL-STD-810D (Method 506.2)
