Quiet Electronics Moderated Newsgroup For The Electronic Professionals and Other Professionals > Connecticut
> Used
> Cleco 8MA-R5 air motors automation nutrunners 3 avail
Cleco 8MA-R5 air motors automation nutrunners 3 avail
Cleco model 8MA7-R5 They come with the attatched pressure sensing switch & signal cable ( approx. 4' long) as shown, tube fittings on inlet & exhaust, and the small ( 1/8") tube fitting on the side for injection lube hookup. Drive is 3/8" square ( removeable adapter on splined shaft)
These motors were removed from a working machine. They have been bench tested, tach readings from 785-840 rpm, and run on a test plate to ensure the clutches are shutting off & resetting properly. PLEASE NOTE; one of the units has an audible "rumble" in the gear section. It was not affecting operation, but was noticed during bench test, when the motor was shut down. So one of the motors has a bad bearing or gear which should be repaired.
There are additional pictures available.
I try to describe any defects which I find. These units may be returned within 14 days if you find a problem which I have missed, or if I have made some mistake in the listing.
Feel Free to email any questions
