Quiet Electronics Moderated Newsgroup For The Electronic Professionals and Other Professionals   >   Delaware   >   New   >   New 55 gallon blow molded closedhead drum

New 55 gallon blow molded closedhead drum


55 Gallon "New Drum" Closed Head
Approved for Human/Livestock Consumption
This item is not available in all locations
Nominal Capacity: 55.0 US Gallons
Actual Capacity 59.5 US Gallons
Export Cubes: 12.0 cu. ft.
Overall Height: 36.0 inches
Minimum Wall Thickness: .0140 inches
Regulatory Info: UN 1H1/Y1.9/150
Each drum has one (1) 2" NPT and one (1) 2" BTR thread bungs. (NPT=National Pipe Thread, BTR=Buttress)
Available in blue, black, white
Maximum filling temperature - 160 degrees F. When filled at this temperature, drum should be allowed to cool to ambient prior to stacking. Drums filled at elevated temperatures should be vented properly to prevent vacuum formation with the drum.
Drums may be stacked 3 high (1 + 2) maximum with pallets between drums.
Handle with parrot beak, side grabber or sling.
Fits four wide on standard trailer.
Recycle symbol embossed on bottom.
Compatibility with hazardous materials as listed in 49CFR are the responsibility of the filler.
Chesser Container is a privately owned company that was founded in 1990. Our philosophy from day one has been...
“Providing the best quality service and highest quality products available to our clients.”
With over 25 years of knowledge in the chemical industry, our perspective lends itself to both product knowledge and CFR compliance. Packaging compatibility is always at the forefront of our discussion with new clients and allows us to review all the options that are available. We bring our clients a wide selection of polyethylene, stainless steel and carbon steel tanks and intermediate bulk containers (IBC’s), as well as the necessary parts to complete the most important job, YOURS.
We offer a complete line of new and refurbished products.
Some of our valued clients include:
Take time to visit our website by clicking on the icon below.
tony.****@chessercontainer.com
Chesser Container's cleaning procedures for refurbished and laundered IBC's.
Due to hazards of certain regulated materials, it is Chesser Container's strict policy that no IBC’s entering our facility will be recertified without first being thoroughly cleaned inside and out. Each IBC will be inspected once entering our facility and an assessment will be made of each to determine what parts and labor issues will be needed. This process is used for production scheduling and parts determination.
Chesser Container's recertification process begins with a complete cleaning of the inside and outside of the IBC. All exterior labels are removed as part of the cleaning process. This cleaning process consists of any or all of the following: cold water, hot water, steam, and chemical cleaning agents. The valve and lid are removed prior to cleaning and are cleaned separately by hand and/or machinery. If the valve and lid are serviceable after the cleaning process, the valve and lid will then be replaced. The IBC is again inspected and completely dried of all condensation. The IBC is then tested in accordance with CFR 49 Section 180.352 – Requirements for retest and inspection of IBC’s. Word for word documentation on CFR 49 Section 180-352 is available upon request.
Tote Tank Ordering Information
Of course you are more than welcome to pick it up at one of our locations yourself.
Other items offered by Chesser Container
We are just a phone call away.
These garden hose fittings are ideal not only for the conversion of NPT (National Pipe Thread) down to a garden hose thread pattern, but they are great for the home. Quick disconnect features of the parts allow for quick on and off of all garden equipment.
Spill Containment/Decks/Ramps/Funnels
Drum/Pail/IBC - Liners/Lids/Caps
Round Bottom Flexible Drum Liners
Straight Bottom Flexible Drum Liners
Heavy Duty Plastic Drum Heaters
Industrial Round Seamless Tins
Polypropylene/ Polyethylene Drum & Pail Pump
Plug-N-Lok Padlockable Security Plug
All Plastic Tamper Evident Overcap
Lightweight Aluminum Drum Plug Wrench
UV Drum Inspection Black Light
Plastic Salvage Drum with Twist-Off Cover
Heavy-Duty Drum Inspection Light



New 55 gallon blow molded closedhead drum