Quiet Electronics Moderated Newsgroup For The Electronic Professionals and Other Professionals   >   Delaware   >   Used   >   tenon maker cutter log furniture make 7 sizes+freedvd

tenon maker cutter log furniture make 7 sizes+freedvd


DVD SHOWS CHAIR CONSTRUCTION, LOGS & MATERIALS, TOOLS USED,
TENON & MORTISE, SANDING & FINISHING. APPROX. 40 MIN.
NEW !!! LOGMAN TENON MAKER II PATENT PENDING FASTER THAN A BEAVER!
To see a streaming video of the Tenon Maker in action Click
here when you get on youtube type in
Tenon Maker,you will see set-up steps & making tenons .
If Your looking for a fast affordable way to put a tenon on a log this is it!
This LOGMAN 2 TENON MAKER is sold with all 7 of the size
wood guides that are used for building log furniture & log handrailing.
The 7 sizes will allow you to build what ever your looking to build
tipped router bit & the newly designed wood guides with much bigger
funnels .The funnel in the wood guides hold the log ends when you go to
feed them into the wood guide. The funnel helps to hold & center log ends
into the center of the wood guides. At the bottom of the page we state the
max. diameter of the log ends that you can feed into the wood guides.
Because of the bigger funnels in the wood guides & the bigger router bit
you won't have to taper log ends down ,"this is a real time saver!! If the log
fits into the funnel of the wood guide it's going to get cut down.
To put a tenon on the end of a log all you need to do is push and turn the log
end into the hole in the wood guide. Tenon Makers work just like an
electric pencil sharpener,the faster you turn the log the faster you can
shoulder tenon on the end of a log. This tenon was designed just for the
log furniture and handrailing builders. We designed this new router bit to cut
a tenon that has holding power. A tenon has holding power if some of the
shoulder of the tenon can be tapped into the hole you drill in a log. The
LOGMAN 2 was not only designed to cut a tenon ,but it was designed to cut
a tenon that works. NOTE, The LOGMAN 2 black router bit will not
work in our basic LOGMAN tenon maker. Our basic tenon makers are sold
with a smaller yellow router bit that uses wood guides that have smaller
funnels. You don't need a vise and you can make any length tenons,(great for
dowelling too.) All you do is put a tenon on one end of a log flip it over & put
a tenon on the other end . That's why we say : "It's faster than a beaver"
Polished aluminum u-bracket that has a pre-drilled hole pattern on the
top that will line up with 70 to 80% of all router bases.
(I RECOMMEND USING A 2 or more HP ROUTER that has a variable
wood guide sizes included are 5/8", 1" 1-1/2", 2", 2-9/16", 2-3/4" & 3"
Two sliding metal brackets that hold the wood guides in the aluminum u-bracket
The adjustable SLIDING STOP, to make same length tenons.
The DUST COLLECTOR that attaches to the back of the tenon maker.
LISTED BELOW ARE MAX DIA. LOGS THAT WILL FEED INTO
THE NEW LOGMAN TENON MAKER II, WITHOUT HAVING TO
TAPER LOG ENDS. Tenons can be any length for all sizes.
wood guide size max diameter log



 tenon maker cutter log furniture make 7 sizes+freedvd  tenon maker cutter log furniture make 7 sizes+freedvd  tenon maker cutter log furniture make 7 sizes+freedvd  tenon maker cutter log furniture make 7 sizes+freedvd  tenon maker cutter log furniture make 7 sizes+freedvd  tenon maker cutter log furniture make 7 sizes+freedvd