Quiet Electronics Moderated Newsgroup For The Electronic Professionals and Other Professionals > Indiana
> Used
> Ge fanuc -- 16I/18I/21I/20I model a maintenance manual
Ge fanuc -- 16I/18I/21I/20I model a maintenance manual
For sale is a GE FANUC Series 16i/18i/21i/20i/160i/180i/210i/160is/180is/210is Model A Maintenance Manual
From the Preface/Introduction of the manual:
This manual consist of 9 chapters plus Apendices A - H - The chapter headings are:
2. LCD mounted type i Series hardware
3. Stand alone i Series hardware
4. Matters common to both LCD-mounted type and Stand-alone type i Series hardware
6. Interface between the CNC and PMC
APPENDIX. The appendix consist of a list of all alarms, a list of maintenance parts, and boot system.
The models covered by this manual are:
Fanuc 16i-TA / 160i-TA / 160is-TA
Fanuc 16i-MA / 160i-MA / 160is-MA
Fanuc 18i-TA / 180i-TA / 180is-TA
Fanuc 18i-MA / 180i-MA / 180is-MA
Fanuc 21i-TA / 210i-TA / 210is-TA
Fanuc 21i-MA / 210i-MA / 210is-MA
This manual is approximately 1-5/8" thick.
One GE FANUC Series 16i/18i/21i/20i/160i/180i/210i Model A Maintenance Manual - GFZ-63005EN/02. Printed October 1999.
All manuals we sell are complete and in generally good shape. Ocasionally you may find a mark or margin note or a page corner turned down. Sometimes pages come loose from the spine (cheap glue I guess), but will all be present and in order. The camera flash makes them appear worse than they actually are. If the manual is in less than very good condition the price has been lowered to reflect its condition. The condition of this particular manual is:
Inside - Like new. - Exterior - Like new.
WARRANTY: If not satisified return for full refund.
