Quiet Electronics Moderated Newsgroup For The Electronic Professionals and Other Professionals > Maryland
> New
> Floor safe polyethylene water resistant 42 lbs. S1201B
Floor safe polyethylene water resistant 42 lbs. S1201B
call us now - 1-(***)-656-4143 ext 2000 - Chris - Thank you!!
....................................................................
Polyethylene In-Floor Safes / Fire, Burglary & Seepage guarantee
Our patented "Poly" safe represents the most dramatic design innovation ever for in-floor safes. This safe provides features never before dreamed of, such as; storage shelves, a filing system and a false floor. Perfect for basements that get wet or homes that the water table is low & homes at sea level you want the best protection. This is the one you want!
* Interchangeable Doors within the FS series safes
* 1/2" Solid Steel 3 Bolt Door (Standard Door)
* Patented, Spring-assisted, Lift-off Door
* Patented Polyethylene Body is Rustproof and Leak Resistant
* UL Listed S & G Combination Locks
* 1/4" Thick Door Collar bolted to the body on all 4 sides using specially hardened bolts
* 1/2" Thick Door Frame welded to the door collar
* Guaranteed protection against Fire, Burglary, & Seepage
* Add $70.00 for a 1" thick door
* Add $55.00 with New Construction Seal on floor safes
* Outside Diminsions - 15" x 15" x 10 1/4"
* Inside Diminsions - 11 1/2" x 14 1/4" x 8"
Installation Methods for Hayman Brand In-Floor Safes
Break through concrete floor with a sledge hammer or a drill, chip a hole to desired size. Dig out under the floor as illustrated to about 3 inches below position of safe. The more reinforced concrete that can be placed around safe, the greater the security. Partially fill hole with concrete mixture and reinforcement, place the safe in the hole, and push the safe down until the top is level with the finished floor. Finish adding the new concrete around the safe. Make sure the top of the safe is kept level with finished floor.
Remove the safe door during installation and store it out of the way, reinstall after cement is set. Seal the dust cover with duct tape to prevent cement from seeping inside. No additional preparation is required to the body of a Hayman In-Floor Safe. If safe is placed where water might run into it, raise safe slightly above floor level and taper concrete up to dust cover level.
Installation When Pouring New Construction Floor
Order your safe with the Water Resistive Seal for new construction installation. Dig out ground to provide a form as shown for cement floor installation, put safe in position in live concrete in hole and adjust safe to floor level. When safe is locked securely by the setting up of cement, fill remaining hole and finish slab pour.
The * HAYMAN GUARANTEE *on the FS series safes
Hayman Safe Co. will at its option repair or replace any defective part or unit. To obtain service on warranty the unit delivered to Hayman Safe Co. or its authorized dealer. Authorization must be received from Hayman Safe Company prior to performance of any warranty work.
Improper installation, use, lack of proper maintenance or accidental damage will nullify this warranty. No other warranty, expressed or implied, is offered. This warranty cannot be changed, modified, enlarged or altered without direct written consent from Hayman Safe Co. Hayman Safe Co. is not responsible for consequential damage, incidental expenses or personal injury. This warranty gives you specific legal rights. You may have other rights which vary from state to state.
LIFETIME GUARANTEE: BURGLARY PROTECTION
POLYMER BODIED FLOOR SAFE GUARANTEE
Hayman Safe Co. will, at our option, replace or repair any of our polymer bodied floor safes equipped with a 3-bolt mechanism or better, that are ever successfully burglarized (except S1201), damaged by fire, or damaged by seepage through the body.
RETURN GOODS AUTHORIZATION
Best of all, it's completely *FREE* to sign up!
